US $1.00-$100.00 / Cubic Meter
Intalox saddles is mainly designed for distillation operations. After knowing the advantages of intalox metal tower packing in distillation, manufacturer has recommended its other purpose especially in stripping, absorption, liquid-liquid extraction, and in heat transfers as well.
Intalox packing has been identified offering successful benefits to users of mass transfer towers with different diameter ranges. In aliition, it even provides a wide range of services.
Intalox structured packing is used heavily for distillation towers. It performs best even on crucial low pressure drop from deep vacuum towers up to surpassing capacity from that of conventional trays in high-pressure towers.
The demand of our intalox salile packing has obviously increased over time to which everything can be owed to the unique intalox saddles packing factor which obviously shows the highest quality of both material and performance.
Among the various intalox saddles classification available, namely, super intalox saddles, plastic intalox saddles, ceramic intalox saddles, polypropylene intalox saddles, FEP Intalox saddles, and SS Intalox saddles, all are provided with custom-made shapes and sizes which satisfies every customer's desire.
Our intalox saddles packing factor that brings uniqueness among other intalox saddles available in the market is the fact that everything has been prepared under the momentous observation of trusteed experts following with international guidelines.
In our ceramic intalox saddles, its size are commonly available in 12mm, 16mm, 19mm, 25mm, 38mm, 50mm, and 76mm. This type of intalox salile has a specific gravity of 2.3 g/cm3 to 2.4 g/cm3 with less than 0.3% water absorption and more than 99.6% of acid resistance which can resist up to 1100 oC maximum operating temperature.
While in our plastic intalox saddles, its available sizes are 25mm, 38mm, 50mm, and 76mm with its void rate of 0.90%, 0.92%, 0.93%, and 0.96%, respectively.
In all of the types of intalox salile packing we have, its a general feature that each provides the best capacity and low pressure drop. This means that based on application requirements, the size proportionally provide the ability to optimize efficiency and capacity.
Having the standard of higher liquid hold-up and even on the liquid residence time, our intalox packing allows better absorption with slow chemical reaction. Aside from that, it also offers minimal sensitivity to vapor and liquid distribution quality allowing the use of conventional liquid distributors.
| Physical properties | ||||||||
| Nominal size(inch) | 3/8" | 1/2" | 5/8'" | 3/4" | 1" | 1-1/2" | 2" | 3" |
| Wilih(mm) | 8 | 10 | 12 | 14 | 21 | 30 | 40 | 57 |
| Height(mm) | 8 | 10 | 12 | 14 | 21 | 30 | 40 | 57 |
| Length(mm) | 16 | 20 | 24 | 28 | 38 | 60 | 80 | 114 |
| Thickness(mm) | 2 | 2.5 | 2.5 | 3 | 4 | 4.5 | 5.5 | 9 |
| Number per m3 | 1560000 | 610000 | 269000 | 146000 | 59000 | 19680 | 8243 | 2400 |
| Package density (kg/m3) | 900 | 780 | 700 | 670 | 650 | 580 | 550 | 530 |
| Free volume (%) | 63 | 68 | 71 | 75 | 77 | 80 | 79 | 75 |
| Surface area (m2/m3) | 825 | 647 | 535 | 350 | 254 | 180 | 120 | 91 |
| Specific gravity (g/cm3) | 2.25~2.35 | |||||||
| Water absorption (%) | < 0.3 | |||||||
| Acid resistance (%) | >99.6 | |||||||
| Max operating temp. | 1100℃ | |||||||
| Porosity (%) | < 1 | |||||||
| Moh’s hardness (scale) | >6.5 | |||||||
| Thermal conductivity(w/m.k) | 0.9-1.0 | |||||||
| Specific heat (j/kg℃) | 850-900 | |||||||
| Physical properties | ||||||||
| Size(mm) | D*H*T(mm) | Surface area(m2/m3) | Void ratio(%) | Number per m3 | Bulk density (kg/m3) | F factor (m-1) | ||
| φ25 | 25*12.5*1.2 | 288 | 84.7 | 97680 | 102 | 473 | ||
| φ38 | 38*19*1.2 | 265 | 95 | 25200 | 63 | 405 | ||
| φ50 | 50*25*1.5 | 250 | 96 | 9400 | 75.2 | 332 | ||
| φ76 | 76*38*2.6 | 200 | 97 | 3700 | 59.2 | 289 | ||
| Product Description: | ||||||||
| Size | mm | 15 | 25 | 40 | 50 | 60/b> | 70 | |
| Thickness | mm | 0.3 | 0.3 | 0.3 | 0.4 | 0.4 | 0.5 | |
| Bulk density | kg/m3 | 282 | 222 | 147 | 133 | 109 | 114 | |
| Number | per m3 | 347000 | 135000 | 50200 | 15000 | 8400 | 4600 | |
| Free volume | % | 96.5 | 96.8 | 97.1 | 98.1 | 98.2 | 98.6 | |
| Surface Area | m2/m3 | 305 | 241 | 161 | 104 | 85 | 62 | |
| Packing Factor | m-1 | 167 | 135 | 79 | 89 | 50 | 39 | |
It offers best capacity and low pressure drop
It can hold-up liquid at maximum time including the residence time
It has versatility in its standard packing
It has low liquid rate services like in DMT purification and Glycol separation
It has high liquid rate services like in Hot carbonate absorber and hot carbonate absorber
It provides foaming systems
High void fraction can be observed
Can be used in either deep vacuum or high pressure towers
Intalox saddles we have are mainly used on services such as scrubbing, absorption, and stripping.
On the other hand, during the process deinking, while it is highly needed to remove unwanted elements and inks from the paper fibers, this intalox packing can play a big role in bleach plant absorbers.
In aliition, intalox structured packing can be used in high pressure towers and deep vacuum towers. Being known as not conversion unit, vacuum towers are referred as one of the simpler refinery units. Specially with certain liquid like crude, for this deep vacuum tower have a better performance, intalox salile packing can be used.
ven if we have a wide range of products while evidently, orders from consumers had increase, we want to emphasize that quality and assurance to satisfy every customers expectation is a must. This is the main reason why every intalox saddles package will surely arrive to our customer's shipping aliress within that range of the item's delivery date.
Intalox salile materials are available in plastic intalox saddles, ceramic intalox saddles, polypropylene intalox saddles, FEP Intalox saddles, SS Intalox saddles, and metal saddles.
With higher capacity and pressure drop lower than in ceramic saddles are the stainless steel intalox saddles which are available in sizes 15mm, 25mm, 38mm, 50mm, and 75mm. This intalox salile can resist to acids specially hydrochloric acid and sulfuric acid.
It is an intalox salile with material known as Fluorinated Ethylene Propylene which is globally known to be used in mass transfer of acid, and corrosive materials in water treatment or chemical industry. It is lightweight and has an impeccable finish.
AS being made from chemical grade porcelain, it is the ceramic intalox saddles who can offer the perfect smooth finish if compared to other intalox salile from other material. It is suitable for all chemicals except on strong HF and alkalies.
Metal intalox salile are fabricated from various metals namely, Carbon steel, Copper, Stainless steel, Aluminum, Titanium, Special alloys, and Zirconium.
Intalox metal tower packing contributes a lot to heat transfer towers like in olefin plant quench columns. Its main purpose is for distillation towers.
With the aim of providing the best quality, opting for an economical yet versatile intalox salile product with high performance characteristics is a wise choice to have it from us.
For heavy usage in towers distillation process, whether it may reach to a crucial pressure drop or surpasses a conventional trays, this intalox salile packing can absolutely offer a high capacity performance.
As found to have proven its quality and unmatched durability, intalox saddles is a good choice to buy. Different combinations of efficiency can be expected as even on its size and shape can be customized. Aside from the mentioned features and application of intalox salile packing, the increase in demand of the product will simply prove the unfailed trust of consumers who had tried it and were satisfied. Buying intalox salile from us is something of high worth.
